UCD-400 • DisplayPort 1.4a – HBR3 8K Generator & Analyzer

4K_new
8K_new

Description

UCD-400 is an HBR3 capable 8K video generator and analyzer. With UCD-400 you can verify DisplayPort™ interfaces up to 8K@30 Hz (8K@60 Hz with DSC) and 4K@120 Hz video modes. The unit supports FEC, DSC, and LTTPR. UCD-400 is approved as an official DP 1.4a Link Layer compliance test tool including DSC and HDCP 2.3 CTS tests.

 

 

Comprehensive Compliance Test Tool

UCD-400 is a VESA Certified DP 1.4a Link Layer Compliance Test Tool for Sinks, Sources and Branches. UCD-400 is also a DCP LLC Approved Test Tool for HDCP 2.3 Compliance Testing of Transmitters, Receivers and Repeaters on the DisplayPort interface.

VESA requires Link Layer and HDCP testing as part of the DisplayPort testing requirement for certification. If a DisplayPort receiver or transmitter supports HDCP (as reported in the product CDF) it shall be tested as part of the certification requirements for obtaining the DisplayPort Logo. (Source: VESA)

Please refer to the DP CTS Tool Options for UCD-400 to get an overview of provided tests for DP 1.4a Link Layer, DSC and HDCP 2.3 Compliance Tests

DP 1.4a CTS Status

From the table below you find the latest updates on DisplayPort 1.4a CTS tests for UCD-400.

DateUpdate
18.3.2022Adaptive Sync CTS tests now available for UCD-400
21.12.2021DisplayID-EDID CTS tests now available for UCD-400

DisplayPort 1.4a CTS status for testing Source DUT.

For detailed information of the Source test sets, click here.

SectionTest IDs in DP1.4a LL CTSUnigraf Test SetUnigraf Implementation StatusVESA Status
Link Layer4.2.1.1 - 4.4.1.3, 4.4.2 - 4.5.1.2MT6637: DP 1.4a Link Layer CTS for Source DUTComplete
DSC4.6.1.1 - 4.6.1.9MT6642: DP 1.4 DSC CTS for testing Source DUTComplete
DisplayID-EDID4.7.1.1 - 4.7.4.1MT6646: DisplayID / EDID CTS for testing Source DUTComplete
4.7.5.1Complete
Adaptive Sync4.8.1.1 - 4.8.2.2MT6648: AdaptiveSync CTS for testing Source DUTComplete

DisplayPort 1.4a CTS status for testing Sink DUT.

For detailed information of the Sink test sets, click here.

SectionTest IDs in DP1.4a LL CTSUnigraf Test SetUnigraf Implementation StatusVESA Status
Link Layer5.2.1.1 - 5.4.1.4, 5.4.2 - 5.5.1.7MT6635: DP 1.4a Link Layer CTS for Sink DUTComplete
DSC5.6.1.1 - 5.6.2.14MT6643: DP 1.4 DSC CTS for testing Sink DUTComplete
DisplayID-EDID5.7.1.1 - 5.7.4.3, 5.7.4.5, 5.7.5.1 - 5.7.12.3MT6647: DisplayID / EDID CTS for testing Sink DUTComplete
Adaptive Sync5.8.1.1 - 5.8.1.3MT6649: AdaptiveSync CTS for testing Sink DUTComplete

Platform for Test Automation

UCD-400 supports test automation to be used in R&D debugging or validation, compliance tests or functional tests in the production environment 

UCD-400 software package includes an SDK with scripting and programming API. Unigraf’s Test System Interface (TSI) allows system integrators a fast and reliable way of implementing the functionality of the test.  TSI is very flexible. It can be used either for various kinds of video and audio tests or to automate complete set of Compliance Tests. 

Unique Features

UCD Console GUI:

UCD Console is Unigraf’s common Graphical User Interface (GUI) for all UCD series productsUCD Console is available for Windows, Linux and macOS operating systems. 

UCD Console enables users to access all test features of the UCD-400. It provides users with a flexible way of navigating between its sink and source roles and functionalities of each role.  

Available functionalities include preview windows for captured video and audiovideo and audio pattern generator, data logger for AUX and metadata contentlink and DPCD register monitoring and control dialogsEDID editor, HDCP status and control functions etc. 

UCD Console is delivered with ready-made test sets (e.g. content check-sum tests and Link Training tests) for testing DisplayPort Sinks and Sources. 

E-learning center: UDC Console GUI

LTTPR (Link Training Tunable PHY Repeaters):

LTTPR is a feature that helps maintain signal integrity between DisplayPort Source and Sink by letting each repeater optimize the signal path with link training. UCD-400 is able to act as a DisplayPort source controlling the LTTPRs in the downstream signal path. LTTPR Test is a software addition for the UCD-400.
E-learning center: LTTPR

Default Tests in UCD-400

UCD-400 device is delivered with UCD Console and Test System Interface (TSI) System Development Kit (SDK) for DisplayPort Sinks and Sources. Please, refer to the table below to see the default tests provided with UCD Console and TSI SDK.

Note: HDCP 2.3 Support is also delivered with the UCD-400 device.

For Testing Source DUT

Feature GroupFeature
Video
Preview, Capture, Snap preview
Status
AudioMonitor, Capture, and graphical preview
Status
LinkLink status, Link configuration
Stream status (video, audio)
HPD status, HPD Assert / De-assert, HPD Long Pulse, HPD Short Pulse
MST feature (up to 4 streams)
FEC feature
EDIDRead / Write, Save / Load
EDID editor
DPCDRead / Write, Save / Load
DPCD decoder
HDCPHDCP 1.3 and 2.3 support
Authentication status, Encryption status
Event LogDP AUX Analyzer
Source DUT TestingExecute TSI tests for source DUT testing

For Testing Sink DUT

Feature GroupFeature
Pattern GeneratorFixed and custom Video Timings
Fixed and custom Video Patterns
Audio GeneratorPlay audio files
LinkLink status
HPD status: (Asserted / De-asserted)
Link configuration: (Lane count, Link rate, Framing mode, Clock made)
MST feature (up to 4 streams)
FEC feature
EDIDRead / Write, Save / Load, EDID editor
DPCDRead / Write, Save / Load, DPCD Decoder
HDCPHDCP 1.3 and 2.3 Control and Status support
Event LogDP AUX Analyzer
Sink DUT TestingExecute TSI Tests for Sink DUT testing

Display Stream Compression (DSC)

DSC feature is available as a software add-on to UCD-400. DSC feature includes both tools for encoding and decoding DSC content, which enables DSC CTS and related tests in DP Link Compliance Test tool.

DSC Decoder allows the user to preview DSC images on the UCD Console. DSC Encoder allows users to convert image bitmaps into DSC encoded custom patterns to be transmitted with the built-in pattern generator on the UCD Console.

E-learning center: Display Stream Compression

Watch this tutorial on sourcing DSC content with Unigraf’s UCD-400:

UCD-411 • DisplayPort™ 1.4a - 8K & HBR3 Video Generator

Generate 8K

UCD-411 is a video generator unit for testing DisplayPort™ sinks up to 8K@60 Hz (with DSC), 8K@30 Hz and 4K@120 Hz video modes with HBR3 max bit rate capability. This device is perfect for users that only need a DisplayPort Reference Source version of the UCD-400.

UCD-411 is a Compliance Test Tool for testing DP 1.4a Link Layer on DP Sinks and HDCP 2.2 & 2.3 on DP Receivers. The unit supports FEC, DSC and LTTPR.

Highlights:

  • DP 1.4a Link Layer CTS Tool for Sinks
  • HDCP 2.2 & 2.3 CTS Tool for Receivers
  • 8K and 4K Reference DP Source
  • HBR3 output
  • MST support (4 Streams)
  • DSC, FEC and LTTPR support
  • USB-C output with supplied converter
  • HDCP 1.3, 2.2 and 2.3 support

Highlights

  • VESA Certified DP 1.4a Link Layer CTS Test Tool

  • DCP Approved HDCP 2.3 CTS Tool

  • Up to 8K Reference Sink & Source

  • DP 1.4a / HBR3 input and output in one unit

  • Cable adapter for USB-C devices testing

  • MST support (4 streams)

  • DSC, FEC and LTTPR support

  • HDCP 1.3, 2.2 and 2.3 support

Available Options

Hardware

HDCP 2.3 Compliance Testing
DP 1.4a Link Layer CTS Testing
DisplayID / EDID CTS Testing
AdaptiveSync CTS Testing
Link Analyzer
DSC Testing
Please, select one of the options above in order to enable "Add to cart" button and request a quote.