DPT-200 • DisplayPort RefSource HDCP 1.3 CTS SW


DisplayPort RefSource Compliance Test System (CTS) Tool software for HDCP 1.3 compliance tests. Software to implement the tests described in DCP LLC DisplayPort HDCP Compliance Test Standard. Nicely organized GUI and reporting software with matching firmware for the Reference Source test equipment.


GUI and Firmware for the Reference Source

Unigraf DP RefSource CTS Tools consist of two components:

  • Windows graphical user interface (GUI) application,
  • Target firmware (FW) for the Reference Source hardware.

The actual tests are implemented by the FW, while system control and status reporting are done by the GUI. The FW implements both the functions needed in the CTS tests and the normal functionality as DP Source.

Compatible with DPT-200 and VTG-5225 DP

The tool can be used with either the VTG-5225 DP pattern generator or the DPT-200 compact size reference source. The functionality of the CTS tool is identical between the two devices. DPT-200 is connected to the PC by using a USB cable which also supplies power to it. The VTG-5225 DP communicates with the CTS GUI using an RS-232 connection located on the backplane of the VTG-5225 unit.

Clearly Organized GUI

The CTS test GUI is organized in functional tabs. Each tab includes a set of functionality needed for a task. Link Layer Tests tab for launching and monitoring Link Layer test, HDCP Tests tab for launching and monitoring HDCP tests and Link training tab for monitoring Source/Sink link training status.

Extended CTS Tool

The RefSource CTS Tools are divided into two groups: the basic set for testing the Sinks and the Extended set for testing Repeaters. Detailed information of the tests implemented in each set please refer to document Guide to Unigraf DP CTS Tool Options.

Pickups from our learning base