DP RefSource HDCP 1.3 CTS Tool

RefSource HDCP 1.3 CTS Product

HDCP 1.3 CTS Testing for DP Sink DUTs

Unigarf's HDCP 1.3 Compliance Test Software implements the tests described in DCP LLC DisplayPort HDCP Compliance Test Standard. Clearly organized GUI and reporting software with matching firmware for the Reference Source test equipment.

Unigraf's Hardware Test Tool for HDCP 1.3 CTS Testing is DPT-200. It's a fully-featured and easy-to-use DisplayPort™ source for compliance testing, development and debugging of DP connected monitors.

Product selection

Basic Configuration
Upgrade for existing DPT-200 HW
Hardware Options
Get a Quote

GUI and FW for the Reference Source

Unigraf DP RefSource CTS Tools consist of two components:

  • Windows graphical user interface (GUI) application,
  • Target firmware (FW) for the Reference Source hardware.

The actual tests are implemented by the FW, while system control and status reporting are done by the GUI. The FW implements both the functions needed in the CTS tests and the normal functionality as DP Source.

Clearly Organized GUI

The CTS test GUI is organized in functional tabs. Each tab includes a set of functionality needed for a task. Link Layer Tests tab for launching and monitoring Link Layer test, HDCP Tests tab for launching and monitoring HDCP tests and Link training tab for monitoring Source/Sink link training status.

Extended CTS Tool

The RefSource CTS Tools are divided into two groups: the basic set for testing the Sinks and the Extended set for testing Repeaters. Detailed information of the tests implemented in each set please refer to document Guide to Unigraf DP CTS Tool Options.

DPT-200 as a Hardware Test Tool

DPT-200 is compatible with two Graphical User Interface SW. DP RefSource CTS GUI is the user interface for compliance testing and DP Source Console GUI is meant for development testing and monitoring the Link Training status. Both tools provide the engineer the access to all information deeded with only few clicks. This will help the engineer in maintaining effective testing or debugging sessions.

DP Source Console GUI allows the user to monitor all aspects of the DP interface like Link Training and HDCP status. You can set the Link Parameters used for Link Training and monitor the sink DPCD register content and Sink EDID.